TÜV CERT ISO 9001:2000 (TÜV
Rheinland InterCert)
(Certificate
Registration No. 75 100 9224, the certificate is valid until 31.12.2008.) for the following territories of
validity: planning, manufacturing, installing and
maintenance of steel structures, boilers and pressure vessels, industrial
pipelines, nuclear power plant equipment and industrial robots. TÜV CERT ISO 14001:2004
(TÜV Rheinland InterCert)
(Certificate
Registration No. 75 110 0234, the certificate is valid until 15.05.2009.) for the following territories of
validity: Planning, manufacturing, installing and
maintenance of steel structures, boilers and pressure vessels, industrial
pipelines, nuclear power plant equipment and special waste storage equipment. MSZ EN ISO 3834-2 (TÜV Rheinland
InterCert)
(registration number: 01 MSZ EN EN ISO 3834-2 122 07 3157, valid till 31-07-2010) in
accordance with: registered quality control system, as well as in possession
of adequate professionals for the weld technology activity and for
non-destructive material examinations. AD 2000-Merkblatt HP 0 (TRB
200) (TÜV Rheinland
InterCert)
(registration
number: 122 07 3158, valid till 31-07-2010) Területi Műszaki Biztonsági Felügyelet /Regional Authority of
Technical Super-vision/ (Szeged) – Authority’s Certificate no. 828-1/2008 (valid until 31-07-2010), which
certifies according to the provision of Paragraph (1), §.2 of the IKIM Order
no. 3/1998. (I.12), that our company is able to perform fusion welding of
metals and activities in connection with this work, because these types of
work are in conformity with the standards ISO 9001 and MSZ EN ISO 3834-2:2006,
and Paragraph (2) of §2 of the order. In possession of the certificate the
company is entitled to use the attested technology of fusion welding and
connected activities at the manufacture, assembly, modification and repair of
welded structures in the area of work, which belongs to the scope of the
regional authority of technical supervision.
The system of quality assurance our company
uses meets the NATO AQAP-2110 requirements. The number of conformity
is 77/025/2007./TI-E (valid until 02.06.2009). (Ministry of Defence
Development and Logistics Agency Directorate of Technology) Area of qualification: Services in connection with designing, development,
manufacturing, implementation and operation of military engineering products
and safety equipment, special machnies, metal structures, as well as provider
equipment included in military stores. We obtained from the Defence Ministry the
code “0073V” NCAGE of the NATO codifying system referring to Pintér Works in
February 2003. Honvédelmi Minisztérium /Ministry
of Defence/ (Registration no.:
718/131/2002) In the areas of activity listed in
the ISO Certificate the company meets the requirements of ‘ CLASSIFIED
Approved for NATO Supply’. Radioaktív Hulladékokat Kezelő
Közhasznú Társaság /Public Utility Company of Radioactive Waste Treatment/ -
Supplier’s Evaluation (Registration no.: BÉ-2006/02, valid until 23.02.2009) Area of nuclear qualification: Execution
of systems, design, manufacturing, mounting, commissioning and maintenance
connected with management of nuclear safety degree graded, as well as low,
medium activity radioactive waste as (main) contractor. MOL Hungarian Oil and
Gas PLC.
Qualified supplier (registration
no.: BMR00013171) Area of qualification: Technical design and machine
manufacturing – supplier qualification category EA.
Paksi Atomerőmű Rt.
/PAKS NUCLEAR POWER PLANT Ltd./
(Certificate no.: KM 08/2006, The date of
expiry: 14.03.2009) Area of nuclear qualification: Design, manufacture and installation, as
prime contractor, of systems and system components classified into safety
class (ABOS) 1,2,3, and 4T. Commissioning and maintenance, as prime
contractor, of systems and system components classified into safety class
(ABOS) 2,3, and 4T. Mechanical, electrical and I&C engineering design,
procurement, manufacture, installation, commissioning, repair and maintenance
of cranes, crane tracks, and lifting devices classified into safety class
(ABOS) 3 and 4T, according to the following: Design and
development: -
checking
of the input data -
preparation
of execution respectively modification plan -
fabrication,
(construction) design -
preparation
of manufacturing (design) plans -
examination
of the plan with the participation of the planner, effecter and permitter
(modification and repeated examination of the plan, if necessary) -
delivery
of the assignment plan documentation. Expertise
activity: -
technical
analyses -
confirmative
calculations -
preparation
of expertise -
strength
computation expertise -
exploration,
development. Manufacturing: -
material
purchasing -
preparation
of technology -
set-up
of licensing documentation for manufacturing (based on existing plans) -
preparation
of workshop drawings -
preparation
of handling, packaging and storage instructions -
the
process of manufacturing (including all technological operations) -
welding -
quality
control of the manufacturing -
material
examinations -
preparation
of the documentation of handing over. Assembling: -
preparation
of assembling organisation programs -
material
purchasing -
preparation
of assembling plans based on the existing effectuation documentation -
preparation
of assembling technologies -
set-up
of licensing documentation for effectuation -
effectuation
of assembling -
welding -
quality
control -
material
analyses -
co-ordination
of the activity of subcontractors during the working on the premises. Commissioning: -
preparation
of work programs -
effectuation
of commissioning -
set-up
of technical documentation of handing over. Maintenance: -
preparation
of maintenance programs -
preparation
of maintenance instructions -
effectuation
of maintenance activity -
welding -
quality
control -
material
analyses -
co-ordination
of the activity of subcontractors during the maintenance works on the
premises -
set-up
of documentation of the quality control of the maintenance. Construction
industry: (Építésügyi
Minőségellenőrző Innovációs Kht. /Construction Public Utility Co. of Quality
Assurance and Innovation/ ÉMI N-3/2003
DECLARATION About the qualification
of organization Pintér Works, as taking part in the designing of nuclear
facilities and implementation of construction. ÉMI N-3/2003 Certificate no.1. For planning the technical documentation of implementing nuclear facilities – completely for all the covering technical branches – supporting structure, construction, building engineering and organizational. ÉMI N-3/2003
Certificate no.2.
For designing cranes, crane rails and lifting devices, their
components of engineering, electric and control units, during the
construction of nuclear facilities and making modification of nuclear
facilities, designing of standard and special cranes, standard and special
lifting devices, steel structure crane rails and crane rail supporting
structures.
ÉMI
N-3/2003 Certificate no.3.
For
manufacturing building trade featured steel structure, and welded steel
structure and other building structures, for manufacturing welded structures
(welded supports and filler elements, steel structure products) during the
construction implementation of nuclear facilities pavement assembly -
building trade featured – load bearing and other purpose construction. ÉMI N-3/2003 Certificate no.4.
For the
purchase, manufacture, assembly, settling, putting into operation, repair and
maintenance of cranes, crane rails and lifting devices, their components of
engineering, electric and control units, and in connection with these for the
manufacture and assembly of steel structures during the construction and
operation of nuclear facilities and during the reconstruction made in nuclear
facilities. ÉMI
N-3/2003 Certificate no.5.
For coating
systems with decontamination, lacquer coating systems against corrosion, in
order to increase fire-resistance limit of carrier steel structures, and for
performing scattered metal coatings against corrosion during the
implementation-construction, reconstruction, modification or maintenance of
nuclear facilities. ÉMI
N-3/2003 Certificate no.6.
For
performing activities of binding and support during the construction of
nuclear facilities and during the reconstruction made in nuclear facilities
in conformity with the prescriptions provided by the manufacturers of the
binding and supporting elements, the own prescriptions of the company and in
conformity with the special editions of the Order ÉVM no. 11/1984. (Viii.1)
on the construction of nuclear facilities. ÉMI
N-3/2003 Certificate no.7. For
performing posterior hole in concrete and armoured concrete structures with
diamond tool drilling or cutting during the building or reconstruction of
nuclear facilities according to the Organization Chart of the Work type and
according to the own prescriptions of the company and in conformity with the
special editions of the Order ÉVM no. 11/1984. (Viii.1) on the construction
of nuclear facilities. |